Unlicensed Frequency Radio Modems
DATAMOVER SS: RS-232 Spread Spectrum
Technology 
DATAMOVER ESS-II: Ethernet Spread Spectrum
Technology 
DATAMOVER ESS-III-900-ODU: Wideband+Serial
with Integrated Panel Antenna
DATAMOVER ESS: Ethernet Spread Spectrum
Technology 
DATAMOVER ESSL: Ethernet Interfaced Spread Spectrum Technology
DATAMOVER SS-IO
- 16 bits of DIO (expandable for additional digital or analog
IO).
- 20 MHz controller that can be programmed with "smarts"
for
user applications.
- 2 + serial ports for user application.
- Serial ports for configuration and Flash upgrade.
- Available with or without internal Spread Spectrum radio.
- Internal relay option.
- GPS interface capability for timing or positioning applications.
- DataMover
SS-IO Specifications (pdf 83k)
- Product
Inquiry Form
DATAMOVER SS-ODU: POE Spread Spectrum Technology
- Professional mounting kit that allows both wall and pole mount
installation including both azimuth and elevation control
- Built to ETSI requirements to withstand all electrical and
environmental issues
- 300mm X 300mm High Gain Antenna
- 902-928 MHz Frequency Hopping Modem
- 2.406-2.482 GHz ISM Band Frequency Hopping
Modem
- Data Rates up to 115kbps
- Forward Error Correction
- Industrial Grade - Extended -40 to +70 degrees C Temperature
Range
- Sleep Mode - ~3mA, Ideal for Solar Applications
- Store and Forward - with Self Healing Networks
- Network Wide Diagnostics - Central Network Control Without the
need to Visit Sites
- Spectrum analyzer PC software included
- DataMover
SS-ODU Specifications (pdf 149k)
- DataMover
SS Manual (pdf 1.1M)
- Product
Inquiry Form
DATAMOVER ESS-ODU: POE Spread Spectrum Technology
- Professional mounting kit that allows both wall and pole mount
installation including both azimuth and elevation control
- Built to ETSI requirements to withstand all electrical and
environmental issues
- 300mm X 300mm High Gain Antenna
- 902-928 MHz Robust Frequency Hopping Modem
- Simultaneously Handles Multiple Protocols/Applications/Users
- Data Rates 256/512kbps
- Industrial Grade - Extended -40 to +70 degrees C Temperature
Range
- Secure – Multiple security levels; preventing eavesdropping
and unauthorized access
- Remotes have both Ethernet & Serial interfaces
- Plug and Play connectivity
- DataMover
ESS-ODU Specifications (pdf 79k)
- DataMover ESS
Manual (pdf 2.8M)
- Product
Inquiry Form
DATAMOVER TRAFFIC
DATAMOVER 2070-TA 
(ATC, ATSC or 2070 controller compatible)
Compatible with all ATC, ATSC and 2070 traffic controllers
that have an H1 card slot.
The H1 card is normally used for hosting a 6A or 7A card (serial
or FSK modem).
- ZERO FOOT PRINT. Installs directly into controller communications
board slot
- No external power supply required
- Electrically isolated from Chassis ground
- Electrically isolated coaxial RF connector for radio antenna
- An electrically isolated serial port is avaialable to be port
shared with the radio
- Second serial port has configurable routing for port sharing
purposes
- Available 900 MHz or 2400 MHz.
- DataMover
2070-TA Specifications (pdf 72k)
- DataMover 2070-TA Installation & Operations
Guide (available upon request)
- Product
Inquiry Form
DATAMOVER 170TM & 170T 
DATAMOVER DETECTOR RACK (DRM)
DATAMOVER WB
- Integral high gain antenna
- Point to point, point to multipoint, or repeater mode
- Available in 2400, 5800, 4900, 900 MHz as well as multi frequency
combinations
- 250 kbps - 50 Mbps channel rate
- Browser and SSH and/or Telnet remote management
- OFDM modulation for non line of sight (NLOS) applications
- Multiple Industry standard security/encryption capabilities
- Articulating wall/mast clamp included
- POE injector/power supply included
- IP67 weather rating
- External antenna and dual antenna versions available
- DataMover
WB-5.8 Specifications (57k)
- DataMover WB-900
Specifications ((121k)
- Product
Inquiry Form
|
